Rear-View Mirror Dash Cam Mount with Interchangeable Joints
Position a compatible dash cam near the mirror without relying on a windscreen suction cup. This rear-view mirror mount clamps around a suitable exposed mirror stem and uses interchangeable camera joints. It is for drivers replacing an existing mount or changing their camera position.
- ✅ Move the camera off a suction mount — A clamp secures the holder to a suitable mirror stem.
- ✅ Frame the view while parked — Adjustable joints let you set the camera angle before the journey.
- ✅ Match the joint to your camera — Interchangeable fittings accommodate the specified mount interfaces.
- ✅ Keep the fixing close to the mirror — The slim clamp uses a short exposed section of the stem.
- ✅ Remove the holder when needed — The screw-fastened assembly can be released rather than permanently bonded.
Check the stem clearance and camera interface first
Measure the accessible mirror stem before choosing this holder. The clamp is stated as approximately 9.7 mm thick and needs about 0.4 inch of exposed stem clearance for installation. Confirm its shape and fit as well as space for the camera, mirror adjustment and cables.
Included joint types are stated to include a 1/4-20 tripod fitting and an M4 fitting, alongside assorted dash cam adapters. Compatibility examples include Rexing V1, Rove R2-4K variants and REDTIGER F7N/F7NP, but the exact camera attachment must match the supplied joint. Where appropriate, the original mount joint may be transferable only if its interface fits.
One mirror-mount kit with assorted joints is supplied; the camera, memory card and power lead are not included. Install and aim it while parked, ensuring it does not obstruct the road view, mirror operation or vehicle systems. Tighten the connections appropriately and check the fixing before use.
The clamp positions a compatible camera near the mirror stem.
An original joint can be transferred only when its attachment fits.
Match the exact camera model and mount interface to the included adapter.
Model examples do not replace checking your actual fitting.
About 0.4 inch of accessible stem clearance is required.
Fit the clamp and adjust the joints while parked.
Technical details
- Product: rear-view mirror dash cam mounting kit
- Main material: plastic
- Attachment: screw clamp around a suitable exposed mirror stem
- Stated clamp thickness: approximately 9.7 mm
- Required exposed stem clearance: approximately 0.4 inch
- Adjustment: multiple articulated joints
- Joint types stated: assorted adapters including 1/4-20 and M4 fittings
- Compatibility examples: Rexing V1, Rove R2-4K variants, REDTIGER F7N/F7NP; exact interface must match
- Package: 1 mount kit with assorted camera joints
- Excluded: camera, memory card and camera power lead
Check your mirror stem and camera fitting, then give your dash cam an adjustable mounting position beside the mirror.
حدِّد الخيارات