Embedded AC Dimmer Module - 3.3/5 V Logic

Bring compatible AC-load adjustment into a microcontroller project. This single-channel embedded dimmer accepts the specified 3.3V or 5V logic arrangement for a properly designed control system.

✅ Adjust a supported lamp or resistive load - The dimmer provides the controlled AC power stage for the matched load and timing arrangement.

✅ Include the control in the programmed project - The logic interface lets the compatible controller provide the required dimming commands.

Match the Load Before Planning the Effect

A compatible filament lamp can be part of a lighting effect that rises or falls in brightness under the project's control. Check the actual load's dimming suitability, especially with LED drivers; the module should not be treated as a universal dimmer for every lamp.

The board is an embedded mains-control component, so plan the timing software, power wiring, enclosure and protection appropriately. Use the module's actual load and cooling limits rather than treating the TRIAC's component rating as the complete assembly's continuous rating.

Technical details

• One-channel embedded AC dimmer module
• 3.3V/5V logic specification; timing/control software required
• 16A-600V selection identifies the component-labelled version; verify module working limits
• Suitable enclosure and complete electrical protection required
• Controller and controlled load separate

Match the load and control requirements, then integrate the dimming stage into the project.