6-Piece Car Polishing and Waxing Kit for Drills, 3-Inch
A polishing kit that turns an ordinary drill into a buffer for paint, headlights and trim. Six foam pads fit a stainless-steel drill adapter, and the different grades take a panel from cutting the scratch back to sealing the glaze. It suits anyone keeping a car or a set of alloy wheels clean at home.
Buff the paint with the drill you already have
✅ Turns your drill into a polisher. A stainless-steel adapter fits standard drills, so you do not buy a separate machine.
✅ Covers every stage of the finish. Separate pads for polishing, waxing and sealing glaze take the panel through each step.
✅ Small pads for tight areas. At 3 inches, the pad reaches a wheel spoke or a door shut.
✅ Sponge that follows the panel. The pads are elastic high-density sponge, so they spread the compound rather than a hard disc.
The pads do the work; the compound, polish or wax is your own choice. Work in stages: a polishing pass, then a wax or glaze layer to protect the finish, changing pad between steps instead of rinsing one.
The adapter is stainless steel and fits a standard drill chuck. Keep the drill moving across the panel in overlapping passes so the finish stays even and no single spot gets overworked.
Six pieces give spare pads for a full car, a set of wheels or a pair of headlights. Sizes are taken by hand, so allow 1-3 mm between one pad and the next.
Technical details
- Pieces: 6
- Pad diameter: 3 inch / 7.5 cm
- Pad material: elastic high-density sponge
- Adapter: stainless steel, fits standard drills
- Stages covered: polishing, waxing, sealing glaze
- Size tolerance: 1-3 mm (manual measurement)
Pick the pad for the stage, spin it on your drill and work the panel in passes.
Изберете опции