SPECIFICATIONS

Alarm Type: Rear Side

Brand Name: NoEnName_Null

Choice: yes

Guiding Line: Yes

High-concerned chemical: None

Length of Video Cable: 6M

Lens Material: Glass

Material: ABS

Origin: Mainland China

Shell Material: Plastic

Viewing Angle : 170°

Wire or Wireless: Wire

Precautions before purchase

(1)Please check if your Android monitor supports AHD720P/AHD1080P before purchasing

(2)Our car camera only supports Android Monitor. Please check carefully before purchasing

(3)Because there may be slight differences between carsproduced in different countries, please check the size beforebuying.

Cameras with CVBS CCD video signal is universal for all monitors, but AHD signal will only work with AHD monitor!

How to check if your monitor has AHD function?

Go to Car Settings>>Factory Settings>>Reverse (Image) Settings

Check if there is an AHD option selection，If not, it is not supported

Fit：

For Frod

Mondeo MK4

CHIA-X2007-2014

Fiesta ST 2014-2017

Focus 2010-2013

For Land Rover

Range Rover 2006-2013

Freelander2 2010-2015

The signals of the camera and monitor need to be matched. Before installing the camera, the corresponding signals need to be adjusted through the monitor settings so that the monitor can be compatible with the camera

*If AHD cannot be selected, AHD cameras are not supported!

Setting method: Go to Car settings >> Factorysettings >> Reverse (picture) settings >> Select AHD 1080P/AHD 720P

Conversion Line Control

AHD 1080P-AHD720P

*If your Android unit does not support AHD 1080P signal, you can switch to AHD 720P signal by cutting the green line.

CVBS-AHD

*If you need to switch the camera to AHD signal, simply cut the green line. However, it should be noted that before cutting the line, you need to check if your Android device supports AHD signal,

Possible issues that may arise during
the installation process

After installation, black screen, no signal,
blurred screen, and black and white image appear

Resolvent:

1. Please check your connection, red trigger wire should connect to your reverse light and monitor reverse-in cable.

2. Please check your signal format, choose right signal to run the camera.

Since our camera is an AHD 1080P and AHD 720P dual signal camera, it is necessary to confirm whether the camera is an AHD1080P or AHD 720P signal. Usually, the camera defaults to the AHD1080P channel, so your monitor should be set to an AHD 1080P signal and the camera power should be restarted to work properly