SGW05 Single-Outlet Garden Water Timer with LCD
Set watering around your routine instead of returning to the tap for every session. The SGW05 single-outlet timer controls a compatible garden hose connection with automatic and manual modes. It is for gardeners running a hose, sprinkler or suitable irrigation line from a pressurised tap.
- ✅ Run a repeat watering routine — Set a start time, interval and duration for a compatible hose setup.
- ✅ Use the hose between sessions — Start manual watering without deleting the automatic schedule.
- ✅ Pause after wet weather — Use the rain-delay setting when you want to suspend planned watering.
- ✅ Check the next setting — The LCD and front buttons put the programme information beside the tap.
Set a routine and keep manual control
Programme the clock, start time, watering duration and interval using the buttons and LCD. The timer opens a single outlet, so any distribution to multiple plants depends on the hose or irrigation equipment connected separately.
Use manual mode for an extra watering session and rain delay to suspend the routine. The delay is a setting you choose; no automatic rain sensor is confirmed as included.
Choose between the options labelled NPT with button and BSPT with button only after checking the actual thread against your tap and hose. Do not assume similarly sized thread standards interchange. The timer needs at least 0.5 bar of water pressure and two AA alkaline batteries, neither a pump nor batteries being included.
Hand-tighten the connection, check for leaks, keep the inlet filter clean and drain and store the timer indoors before freezing weather. Hose and sprinkler equipment are separate.
Set the single outlet using the buttons beside the LCD.
The display keeps the current time and watering programme visible at the tap.
Allow space for both the timer body and the connected hose fittings.
Check the thread standard and supplied connection parts against your tap and hose.
Connect to a suitable pressurised supply and set a watering routine.
Manual mode provides an extra session without deleting the automatic programme.
Use the rain-delay setting to pause planned watering after wet weather.
Check battery condition regularly and replace the required AA batteries when needed.
Technical details
- Model: SGW05
- Outlets: One
- Controls: LCD and front buttons
- Modes: Automatic schedule, manual watering and rain delay
- Variant labels: NPT with button or BSPT with button
- Connection requirement: Match the actual tap and hose thread standard
- Operating pressure: 0.5–8 bar
- Operating temperature: 4.5–45 °C; store away from frost
- Power: Two AA alkaline batteries, not included
- Package: One timer, quick connector, thread-seal tape and instructions; hose, sprinkler and pump not included
Check your tap thread and water pressure, then set a watering routine that fits your garden.
Изберете опции