OBD2 Scanner Code Reader with Engine Diagnostics & Battery Test
See exactly what’s wrong with your car before it becomes expensive. This OBD2 scanner reads engine faults in seconds and shows clear data from your vehicle’s system, so you stay in control.
Turn off the check engine light with confidence after fixing the issue and avoid unnecessary guesswork or repeated trips to the mechanic.
Know your car’s condition instantly and act with confidence
✅ Identify engine issues quickly so you avoid costly trial-and-error repairs
✅ Clear trouble codes and turn off warning lights after fixing the problem
✅ Monitor live data streams to understand real-time engine performance
✅ Check battery voltage to prevent unexpected breakdowns
✅ Access 10 OBD2 test modes for deeper, more accurate diagnostics
✅ Works with most OBD2 vehicles across US, EU, and Asian models
Quickly understand issues before they turn into costly repairs.
LAUNCH CR3008 PLUS OBD2 Scanner OBDII Code Reader Tool for Check Engine Light battery Voltage Test
LAUNCH CR3008 PLUS Language :
Portuguese, German, Japanese, Russian, Spanish, English and French
Use it comfortably in your preferred language for clearer results.
LAUNCH CR3008 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:
#1. Gas Cap #2. Oxygen Sensor #3. Air Fuel Ratio Sensor #4. Mass Air Flow Sensor #5. Ignition Coils #6. Spark Plug Wires #7. Spark Plugs #8. Thermostat #9. EGR Valve #10. Evaporatative Emission Canister Purge Valve(EVAP) #11. Catalytic Converter.
And LAUNCH CR3008 obdii code reader will read codes indicating these fault parts. After the car problems have been solved, LAUNCH CR3008 car code reader can erase these trouble codes and turn off check engine light.
Pinpoint the exact issue instead of guessing parts.
Full OBD2 Check--Make a Better Detection for Car Engine System!
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Understand your engine’s performance with clear, usable data.
LAUNCH CR3008 ODB2 Car Diagnostics Support vehicles
LAUNCH CR3008 supports both 12V diesel and gasoline vehicles, as long as the car is compliant with standard OBDII/EOBD protocols, with OBDII 16pins diagnostic port.
American (USA) cars
for Standard OBD2 Cars from 1996 to Now:
for Chrysler, for Ford, for GM, for Jeep
European cars
for Standard OBD2 Cars from 2003 to Now:
for Alfa Romeo , for SAAB , for Acura , for Opel, for Audi , for Seat , for Bentley , for Skoda , for Daewoo, for Benz , for Daihatsu , for Land Rover, for BMW , for Vauxhall ,for Volvo ,for VW , for Ford , for Jaguar
Japanese cars
for Standard OBD2 Cars from 2008 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota.
Chinese cars:
for Standard OBD2 Cars from 2014 to Now:for BYD, for Chery, for Geely, for Great Wall, for Karry
Use one tool across multiple vehicles without compatibility worries.
LAUNCH CR3008 PLUS supports Lifetime Free Update via PC , 5 Years warranty , Lifetime Tech Support !!!
Stay up to date without paying for future updates.
LAUNCH CR3008 Plus Packing List :
1pc LAUNCH CR3008 Plus Main Unit
1pc Manual book
Everything you need to start diagnosing right away.
This scanner connects directly to your car’s OBD2 port and communicates with the ECU to pull real-time data, stored fault codes, and system status. You can view live streams, freeze frame data, and emissions readiness to understand exactly how your vehicle is running.
It supports 10 diagnostic modes, giving you deeper insight than basic code readers. From reading and clearing codes to checking sensors and vehicle information like VIN, it turns complex vehicle data into something practical and clear.
With multilingual support and coverage for a wide range of vehicles manufactured from 1996 onward (depending on region), it fits easily into everyday maintenance, whether you’re checking your own car or helping others.
Unlike simpler tools that only show codes, this device gives context and live data, helping you make informed decisions instead of guessing or replacing parts unnecessarily.
Take control of your car’s health and diagnose issues with clarity and confidence.
Изберете опции