DIY Drip Irrigation Kit with Adjustable Heads, 10–30 m
Water a line of pots without carrying a watering can from one container to the next. This DIY irrigation kit combines flexible tubing, connectors and adjustable watering heads. It is for gardeners laying out a small greenhouse or container-watering system.
- ✅ Reach several pots — Run tubing between containers so water can reach the plants along your chosen layout.
- ✅ Adjust each watering point — Turn the head to change its flow rather than giving every pot the same setting.
- ✅ Keep heads near the plants — Use the supports to position the tubing and watering points where needed.
- ✅ Choose the length for the layout — Select the available tubing kit that reaches your planned pots and connection point.
Lay out the watering around your plants
Plan the route first, then arrange the tubing and tee connectors around the pots you want to water. The flexible line lets you build a layout for containers or a greenhouse bench rather than carrying one fixed sprinkler from place to place.
The adjustable heads can be opened for different flows or closed at a watering point. Check the flow at the far end after connecting the system: the result depends on water pressure and the layout, not simply on the length of tubing.
Choose a 10, 15, 20, 25 or 30 m kit. The package contains the selected irrigation components, not plants or containers. No timer or pump is confirmed as included, so do not treat it as a complete scheduled watering system without additional equipment.
The kit combines tubing, watering heads, connectors and supports for a custom layout.
Plan branches around your own pots rather than following a fixed one-size layout.
Check the connector and tubing sizes against the water connection you intend to use.
Adjust the head at each watering point rather than relying on one fixed flow.
The opened head spreads water around its position; output depends on the supply and adjustment.
Turn the head to choose a flow from dripping to a wider spray.
Technical details
- Product: DIY drip irrigation kit
- Tubing-length options: 10, 15, 20, 25 or 30 m
- Material: Plastic components and flexible tubing
- Watering heads: Adjustable flow
- Layout components: Tee connectors
- Positioning: Support stakes
- Connection: Tap/hose adapter components
- Package contents: Selected tubing kit with watering heads, connectors and supports
- Not confirmed included: Timer, pump or automatic controller
- Requirement: Suitable water supply and compatible connection
Measure your watering route, choose the kit length and lay out the heads around the plants you tend.
Vyberte možnosti