Tricolour Silk PLA Filament, Red/Blue/Green, 1.75 mm, 250 g

Give a decorative print a red, blue and green silk-style appearance without painting separate colour sections. This tricolour PLA filament comes on one small spool for compatible 1.75 mm FDM printers. It is for makers printing display models and decorative forms.

• ✅ Create a multicolour display piece — The red, blue and green filament combination adds colour variation within a single print.
• ✅ Highlight a sculpted surface — The silk-style finish offers a reflective appearance on decorative shapes.
• ✅ Try the effect on a small project — The smaller spool is an option when exploring a new finish without a large reel.
• ✅ Plan a print around the visible result — The sample models show the sort of decorative use to consider when choosing your geometry.

Let the shape reveal the colour effect

Curves and facets can make the appearance of a multicolour material more noticeable across a display object. The visible mix depends on model shape, viewing angle and printing setup; the sample photographs are examples rather than a promise of an identical colour placement.

The recommended starting settings are 200–230°C extrusion, 40–60°C bed temperature and 50–80 mm/s print speed. Check your printer's material requirements and begin with a small test before committing to a longer decorative print.

The package is one 250 g spool of red/blue/green PLA, not three separate colour reels or a printed model. Compare the reel dimensions with your holder. Printing equipment, finished objects and bed adhesive are not confirmed as included.

Compare the reel's illustrated diameter, width and centre opening with your spool holder.

The model illustrates the red, blue and green combination; the printed figure is not supplied.

Facets and curves show colour differently, so test your chosen model and settings.

Keep the free filament end secured between uses and tune settings with a small sample.

Technical details

• Material: silk-style PLA
• Colour combination: red, blue and green
• Filament diameter: 1.75 mm
• Net filament mass: 250 g
• Compatible process: suitable 1.75 mm FDM printers
• Recommended extrusion temperature: 200–230°C
• Recommended bed temperature: 40–60°C
• Suggested print speed: 50–80 mm/s
• Illustrated reel: 15 cm diameter, 3.2 cm width, 5.3 cm centre opening
• Included: 1 filament spool; printed models not included

Choose a decorative model, test the settings and bring a three-colour silk-style finish to your next print.

Explore more 3D printing accessories