3110 3D Tripod Head with Handle, 1/4 Screw and 3/8 Base
Following a bird across a garden means turning the camera by hand. A handle on the head makes that a one-handed move. This 3D pan-tilt head has a 1/4 camera screw on top and a 3/8 thread underneath, rated to 2 kg, for compact cameras and light phone rigs.
A Handle for Panning and Tilting
✅ Grip for a moving subject The handle gives your hand a place to hold while the camera follows a bird, a child or a car.
✅ Camera screw on top A 1/4 inch screw is the fitting used by most compact cameras and phone clamps.
✅ Base thread underneath The 3/8 inch thread takes the stud on many tripods, light stands and clamps.
✅ Portrait at a tilt The head tips to vertical, so a tall subject can be framed without remounting the camera.
✅ Light in a day bag At about 79 g the head adds little to a kit carried between locations.
Panorama is a full turn, which is the part that matters for a sweep of a room or a horizon. It is a 3D type, so panning and tilting are separate movements rather than one loose ball.
The load figure covers everything above the head: a compact body with a light lens sits well inside 2 kg, while a long telephoto or a phone clamp adds to it. Weigh the combination before relying on the figure.
Three options are on the page, so confirm the selected one at checkout. No quick-release plate, case or phone clamp is named, and the screws' material is not given, so add a plate if your camera needs one. Colour is shown in the pictures and can vary a little between screens.
Technical details
- Type: 3D pan-tilt tripod head
- Model: 3110
- Load capacity: 2 kg
- Head weight: about 79 g
- Camera thread: 1/4 inch
- Base thread: 3/8 inch
- Panorama rotation: 360 degrees
- Vertical tilt: 90 degrees
- Material: ABS
- Package contents: 1 tripod head
Check the thread on your camera and tripod, then add the head to the kit.
Vælg muligheder