ESP32-S3 Camera Development Board with USB-C
Build a compact wireless camera project around ESP32-S3. This development board combines a camera connection, memory and USB-C programming in a small electronics format.
✅ Develop without a separate download adapter - USB-C supports the board's direct programming arrangement.
✅ Add wireless connectivity - 2.4 GHz WiFi and Bluetooth LE support a compatible programmed project.
✅ Keep image buffers and code on board - 8 MB PSRAM and 8 MB flash support suitable applications.
✅ Explore portable designs - The board provides a compatible battery connection and charging circuit.
Firmware and Camera Configuration Are Part of the Build
The selected version is labelled with camera. Match the supplied camera model with the board pinout and firmware rather than assuming every ESP32-CAM example will run unchanged.
The board is approximately 30.4 x 38.4 x 4.5 mm and includes a microSD slot and two LEDs. Use the specified 5 V USB-C source or correct battery arrangement, following the technical documentation.
Technical details
- ESP32-S3R8 platform
- 8 MB PSRAM / 8 MB flash
- 2.4 GHz WiFi / Bluetooth LE
- USB-C interface
- Camera-supported configuration
- MicroSD slot
- Approximately 30.4 x 38.4 x 4.5 mm
- Host code and enclosure separate
Start a compact wireless camera development project.
Optionen auswählen