KE Series Red Laser Distance Meter, 40–120 m Options
Measure a room before planning furniture, flooring or renovation work. These KE-series laser distance meters offer distance and calculation modes in a handheld tool. They are for DIY users and tradespeople choosing the range and controls suited to their measuring tasks.
- ✅ Take a room dimension from one position — Laser distance measurement avoids extending a tape across the entire span.
- ✅ Plan a floor or wall area — Area mode calculates from the measured dimensions for your project notes.
- ✅ Follow a changing distance — Continuous measurement lets you observe the reading while adjusting the instrument's position.
- ✅ Keep measurements in familiar units — Metres, feet and inches can be selected to match your plans.
- ✅ Choose the model for the task — Separate range options let you compare the required reach before ordering.
Choose the range and controls for your project
Select KE40, KE50, KE70, KE100 or KE120 for the corresponding 40, 50, 70, 100 or 120 m maximum-range option. Those models share the larger control layout, two bubble levels and measurement memory specified for that series. KE40S is a separate 40 m model with a simpler front-panel layout; do not assume it includes every larger-series feature.
Both model groups provide distance, continuous, area, volume and indirect Pythagorean measurement modes, with unit selection and addition/subtraction. Set the measurement reference correctly before using a reading in a plan. Target surface, alignment and lighting affect practical measurement conditions.
Supply AAA alkaline batteries separately. The larger-series pack specifies the meter, pouch and manual; KE40S specifies the meter and manual, without a confirmed pouch. The laser is Class 2: do not look into the beam or aim it at another person's eyes.
The larger KE-series layout includes separate controls and bubble levels.
Self-calibration is available; check the reference and settings before measuring.
The instrument uses a red measuring beam; do not look into the emitter.
The pictured larger-series housing carries an IP54 marking; it is not an immersion rating.
Calculation modes use the distances you measure; alignment still matters.
KE40S is the separate simpler-control 40 m model.
The emitter and receiver belong to the distance-measuring system.
Technical details
- Options: KE40, KE40S, KE50, KE70, KE100 and KE120
- Maximum ranges: 40, 40, 50, 70, 100 and 120 m respectively
- Laser: red, Class 2, less than 1 mW
- Modes: distance, continuous, area, volume and Pythagorean
- Units: m, ft and in
- Larger-series features: 2 bubble levels and up to 99 stored values
- Larger-series power: 2 × 1.5 V AAA batteries, not included
- KE40S power: AAA batteries, not included
- Larger-series pack: meter, pouch and manual
- KE40S pack: meter and manual; pouch not confirmed
Choose the model and range that suit your room measurements and turn the readings into a clearer project plan.
Optionen auswählen