Four-Direction Tilt Sensor Module, 3-5 V

Let a microcontroller project respond when its orientation changes. This tilt-switch module provides a digital high/low signal in a small board format, with an optional case.

✅ Detect a change from level - The switch responds when tilted in the supported directions.

✅ Read a simple digital state - A low/high output is straightforward to use in a compatible program.

✅ See the event on the module - An onboard indicator lights when the tilt output activates.

Turn Orientation into a Programmed Response

The module outputs low when tilted and high when resting level in the specified orientation. It is a switch indication rather than a continuous angle measurement.

Connect through the PH2.0 three-pin interface using ground, 3-5 V supply and signal. The approximately 38.4 x 22.4 mm board includes fixing provisions; choose bare sensor or cased version.

Technical details

• Four-direction tilt-switch module
• 3-5 V supply
• Digital output
• PH2.0 three-pin connection
• Approximately 38.4 x 22.4 mm
• Bare or cased option
• Controller and code separate

Add a simple tilt response to your next electronics project.