Solar Wall Lamp with E27 LED Bulb, IP65, Two Modes

A path light that needs no cable run is the difference between lighting a gate and leaving it dark. This solar wall lamp mounts on a wall, charges through a 5 V 2.7 W panel by day and switches itself on at dusk, with an E27 LED bulb supplied. For gates, porches and shed walls.

Light where there is no cable to run

✅ No cable to run The panel charges the battery, so a gate post or shed wall needs no wiring.

✅ On at dusk The sensor switches it on as the light fades, so a late return is lit.

✅ Two brightness modes Brighter for a driveway, softer for a porch or path.

✅ Bulb swappable The E27 bulb detaches, so a failure means a new bulb, not a new lamp.

Site the panel where it sees sun for most of the day. A wall under a deep eave will still light, but the 5 V 2.7 W panel needs daylight to put charge back into the 3600 mAh cell, and a shaded wall shortens the run each night.

Brightness is set in two steps rather than on a dimmer, so the choice is between the brighter setting and the softer one. Four LEDs sit in the lamp and an E27 LED bulb is supplied with it.

Screws come with it and the fitting is assembled on the wall, so the parts on the bench are the lamp, the bulb, the battery and the fixings. The E27 socket means a replacement bulb is a standard part, and the bulb can be lifted out for cleaning.

Technical details

• Power source: solar panel, 5 V 2.7 W
• Battery: 3.7 V 3600 mAh lithium, included
• Bulb: E27 LED, included and detachable
• Protection: IP65
• Modes: two brightness levels, not dimmable
• Switching: on at dusk, off at dawn, automatic
• Body: ABS and PC
• Certification: CE, EMC, RoHS
• Included: lamp, E27 LED bulb, battery, screws
• Options: two versions, selected at checkout

Pick the sunniest wall, screw the lamp in place, and let dusk switch it on.

See more: explore more outdoor lighting