LED Motion Sensor Night Light for Cabinets and Wardrobes

The hallway is dark and the switch is behind you. This motion sensor light picks up the movement and comes on by itself, then goes out after 25 seconds. Six LEDs, warm or cold white, with a magnet patch and a USB cable in the box. For stairs, wardrobes and kitchen cabinets.

Light where your hand reaches, off in 25 seconds

✅ Light without a switch Step into the hall at night and the lamp comes on as the sensor catches the movement.

✅ Out again in 25 seconds Nobody has to remember to turn it off: it switches itself off after the delay.

✅ Stays off in daylight The sensor does not trigger in daylight, so the battery is not spent on an empty hallway.

✅ Magnet patch, no drilling Stick the patch on a cabinet or wardrobe panel and the lamp hangs from it.

✅ Warm white or cold white Two light colours are sold, so a hallway can run warm and a wardrobe can run cold.

The magnet patch is the whole fixing. It goes on the underside of a cabinet, the inside of a wardrobe door or the side of a stair riser, and the light sits over it, so a rented kitchen comes away without screw holes when you move out.

The sensor reads movement across a wide arc, from roughly nothing to three metres, and the light stays on for about 25 seconds. That is long enough to fill a glass, cross a landing and get back into bed, and short enough that the lamp is dark again by the time you are settled.

Daylight is handled by the sensor itself, which does not switch the lamp on while the room is bright. In a hallway with no window it will come on more often; in a wardrobe it only runs when the door opens onto a dark interior.

A battery is included, and the box holds one light, one USB cable and one magnet patch. A USB adapter is not part of the package, so charge it from a socket you already have. Cold white suits a worktop, warm white suits a bedside.

Technical details

• Light source: LED, 6 pieces
• Light colour: cold white or warm white
• Sensor: infrared with Fresnel lens, 120 degrees, 0 to 3 metres
• Auto-off: 25 seconds after movement stops
• Rated voltage: 5 V
• Rated power: 0.6 W
• Body material: ABS
• Certification: CCC and CE
• Included: 1 light, 1 USB cable, 1 magnet patch, battery

Fit the patch where the switch is not, and let the hallway light itself.

See more: explore more night lights and smart home lighting