NEMA 17 Stepper Motor - 48 mm Body

Add step-controlled movement to a compatible mechanism with this NEMA17-format motor. The selected version has a 5mm shaft and a nominal 1.8-degree full-step angle.

✅ Move the mechanism in commanded steps - The hybrid stepper provides the mechanical movement when driven by a correctly configured compatible driver.

Build the Movement Around the Motor

Use the motor where the mechanism needs the corresponding stepper format and shaft connection, such as a suitable small motion-control build. Match the mount and coupling before completing the assembly so the mechanical connection suits the intended load.

The motor needs its own compatible driver and supply arrangement. Check the delivered motor's actual phase-current and wiring specification before setting the driver, and test the movement without forcing the mechanism against its limits.

Technical details

• NEMA17-format hybrid stepper motor
• Actual shaft selection: 5mm
• Nominal full-step angle: 1.8 degrees
• Four-lead connection specified; check actual pinout
• Motor only; driver, controller and power system separate
• Verify actual current and mechanical dimensions

Match the mount, shaft and driver, then add the stepper to the mechanism.