DCJ95 Digital Angle Gauge

Read an angle or slope at the workpiece with a compact digital gauge. The DCJ95 combines magnetic positioning, relative measurement and a hold function with rechargeable power.

✅ Measure from the reference you choose - Relative and absolute modes let you take the supported angle reading in the required reference arrangement.

✅ Record the value without rushing - Data hold retains the indication while you note the result.

✅ Support the gauge on suitable steel - Built-in magnets provide a positioning option when the contact surface matches.

✅ Recharge for the next measuring session - The built-in rechargeable battery prepares the gauge again between tasks.

Bring the Angle Reading to the Work

For a suitable layout or setup check, put the gauge against the reference surface and select the measurement mode for the task. Angle and slope readouts provide different ways to record the same setup information.

Check that the gauge sits correctly and is retained before relying on magnetic placement. Prepare the reference and calibration as instructed, then use hold when the screen is awkward to read in position.

Technical details

• Model: DCJ95 digital angle/slope gauge
• Measuring range: 4 x 90 degrees
• Display resolution specified: 0.05 degree
• Relative/absolute modes, data hold and magnets
• Rechargeable 3.7V battery; yellow, grey, blue or black

Choose the colour and bring the angle reference to the next setup check.