Gutter Outlet and Stop-End Kit for Halls Popular Greenhouses

Replace missing gutter ends and provide an outlet at each side of a compatible greenhouse. This four-piece gutter kit is for Halls Popular greenhouses, subject to checking the gutter profile and fit. It is for owners repairing an existing rainwater-drainage arrangement.

• ✅ Repair both sides in one job — Two outlets and two stop ends provide the four replacement fittings.
• ✅ Give collected water an exit — Each outlet has a projecting connection for suitable separately supplied hose.
• ✅ Close the opposite gutter ends — The paired stop ends complete the arrangement beside the outlets.
• ✅ Check fit before starting the repair — The dimensional images let you compare the fittings with your existing gutter.

Replace the fittings around an existing gutter

The kit combines two outlet pieces with two plain stop ends. Fit an outlet where water should leave each gutter and a stop end at the opposite end, following the arrangement and profile of your greenhouse. The parts are black, with a 3D-printed finish.

Compatibility is stated for Halls Popular greenhouses, but compare the gutter profile with the pictured fittings before ordering. The outlet body is shown at approximately 57 × 40mm, while each stop end is shown at approximately 40 × 25mm. These are fitting dimensions rather than confirmation of every greenhouse gutter size.

The projecting outlets provide a connection point for suitable hose if you want to direct the collected rainwater onward. Hose, water-storage containers and the greenhouse are not included. The set replaces the end fittings rather than supplying new gutter lengths.

Two outlets and two stop ends give you the four replacement end fittings.

The outlet bodies are shown at approximately 57 × 40mm; compare their profile with your gutter.

Each stop end is shown at approximately 40 × 25mm.

The projecting outlet provides a connection for suitable separately supplied hose.

The plain stop ends close the non-outlet ends of the gutter arrangement.

The close-up shows the channel profile and printed surface of a stop end.

Technical details

• Intended compatibility: Halls Popular greenhouse gutters; verify profile and fit
• Package quantity: 4 fittings
• Outlets: 2
• Stop ends: 2
• Colour: black
• Construction: 3D-printed fittings
• Outlet body dimensions shown: approximately 57 × 40mm
• Stop-end dimensions shown: approximately 40 × 25mm
• Exclusions: hose, gutter lengths, water butt and greenhouse not included

Compare your gutter profile, then replace the missing end fittings with one four-piece kit.

Explore more garden tools and accessories