Zigbee Wireless Scene Button

Start a smart-home scene with a button press instead of reaching for your phone. This battery-powered Zigbee scene switch gives compatible eWeLink or Zigbee2MQTT setups a small, convenient physical control.

✅ Put a scene within easy reach - Place the button by a door or on a table to trigger a configured scene from that spot.

✅ Use two press actions - Single-click and double-click support gives you two ways to call the scenes your system allows.

✅ Choose a position without a power cable - The included CR2032 battery lets the button sit away from a wired power connection.

Make Your Everyday Scene Easier to Start

A scene is most useful when it is easy to trigger at the right moment. Keep the button where you arrive home or settle down, then assign the available press actions to the routines you have configured in your compatible system.

The button needs a supported eWeLink Zigbee gateway or Zigbee2MQTT setup. It is not compatible with Tuya Smart Life Zigbee gateways. Confirm device support before ordering, and remember that the gateway and the devices controlled by the scene are separate.

Technical details

• One Zigbee 3.0 scene button
• Single-click and double-click scene actions
• CR2032 3V battery included
• Approx. 50 x 50mm
• Requires eWeLink Zigbee gateway or supported Zigbee2MQTT setup
• Not compatible with Tuya Smart Life Zigbee gateways

Put your chosen scene on a button where you will use it most.