Mini Desktop Projector Stand with Tilt & 1/4-Inch Mount
Adjust a compatible mini projector's vertical aim from the tabletop instead of propping it up on loose objects. This small stand has a tilting mounting plate and quarter-inch screw connection. It is for users whose projector matches the fitting, dimensions and stated load limit.
- ✅ Aim higher or lower from the table — The tilting plate offers the stated upward and downward adjustment range.
- ✅ Hold the chosen angle — Side cross-head fasteners secure the tilt after adjustment.
- ✅ Attach a compatible threaded device — The quarter-inch mounting screw connects to a matching device socket.
- ✅ Separate the base from the tabletop — Silicone pads form contact points beneath the stand.
- ✅ Keep the setup compact — The low desktop footprint suits a small, correctly balanced projector within the load limit.
Check the mounting socket, balance and clearance
Match the projector's socket to the stated 1/4-inch BSW thread and check screw engagement, mounting position and body clearance. The nominal screw diameter alone does not establish fit for every projector, camera or phone holder. The device must remain balanced over the base.
Set the angle within the stated ±30° range and secure the side fasteners before operating the projector. Tilting changes the beam aim; it does not guarantee a rectangular image or replace the projector's optical and keystone adjustments.
One white stand is supplied. Its stated load limit is 2.5 kg, with an approximate 18 × 12 cm footprint and 5.5 cm height. A projector, camera, phone clamp and screwdriver are not included. No power source is needed for the stand itself.
The supplied product is one stand; the projector in the inset is separate.
Use a level, stable surface with enough room for the base and device.
Tilt changes beam aim; actual image geometry depends on the projector setup.
The stated tilt range is ±30°, secured by the side fasteners.
Check the 2.5 kg limit, fitting and balance; the example devices are not included.
Silicone contact pads are arranged beneath the oval base.
The top plate combines a quarter-inch screw and silicone contact pad.
The approximate dimensions are 18 × 12 × 5.5 cm; one white stand is supplied.
Technical details
- Item: mini desktop projector stand
- Mount thread stated: 1/4-inch BSW
- Tilt range stated: ±30° vertically
- Stated load limit: 2.5 kg
- Approximate dimensions: 18 × 12 × 5.5 cm
- Approximate net weight: 0.39 kg
- Colour: white
- Contact pads: silicone on base and mounting plate
- Power requirement: none
- Package: 1 stand; projector, phone clamp, camera and screwdriver excluded
Check your projector's mounting fit and balance, then choose a stable tabletop starting point for the next screening.
Válasszon opciókat