Zigbee 3.0 LED Strip Controller - Channel Options

Bring a suitable LED strip into your Zigbee lighting setup. Choose the controller that matches your strip to adjust brightness and supported white or colour functions.

✅ Adjust lighting from a connected system - A matching Zigbee gateway brings the controller into supported app controls and routines.

✅ Set the room's brightness - Dimming control lets you lower or raise the output of a matching strip.

✅ Change more than brightness where supported - CCT and colour versions add the white-tone or colour controls supported by that specific strip and controller.

Match the Controller to the Strip

Choose single-colour dimming, CCT, RGB, RGBW or RGBCCT according to the strip's channel layout. Each version handles its own lighting format; a single-colour controller does not provide RGB colour effects.

A Zigbee bridge or coordinator is required. Match the strip and supply voltage within the supported DC 5 to 24 V family, and keep the load within the actual controller limits. Voice control depends on the connected gateway and service.

Technical details

• Zigbee 3.0 communication
• Requires a bridge or coordinator
• DC 5 to 24 V application family
• Single-colour, CCT, RGB, RGBW and RGBCCT options
• ABS housing
• Voltage and load must match the selected setup

Connect a matching LED strip to your Zigbee lighting arrangement.