ZJ030MR Wired Lavalier Microphone, 1.5m, 3.5mm Plug Options
Keep your hands free while recording speech with a microphone clipped to your clothing. The ZJ030MR wired lavalier uses a 1.5 m lead and a selected 3.5 mm plug configuration for a matching microphone input. It is for presenters, interviewers and home recording setups.
- ✅ Present without holding a microphone — The clothing clip keeps the small microphone attached to a suitable collar or lapel.
- ✅ Place the recorder off your clothing — The lead gives space between the clipped microphone and the connected recording input.
- ✅ Avoid wireless pairing before a take — The wired connection goes directly to a compatible microphone socket.
- ✅ Choose the input connection you need — Separate two-, three- and four-section plug options accommodate different contact arrangements.
Match the plug wiring before recording
The available options are 2-1.5m Long 3.5mm, 3-1.5m Long 3.5mm and 4-1.5m Long 3.5mm. Their plug contact counts differ. A 3.5 mm socket may be a microphone input, headphone output or combined headset port, and matching diameter alone does not establish compatibility.
Use the selected variant image and your recording device's input requirements to choose the plug. A compatible adapter or powered microphone input may be required by the device; neither is universally interchangeable. The current variants are 1.5 m, so the longer lengths mentioned in the original title are not offered here.
Clip the microphone where clothing will not rub against its head and make a short test recording before the main take. One microphone with attached lead, clothing clip and illustrated foam cover is supplied. It has no built-in battery; any needed input bias comes from suitable recording equipment. A phone, camera, recorder, sound card and adapter are not included.
A clip fastens the small microphone to clothing while the lead runs to a compatible input.
The microphone comes with a clothing clip and illustrated foam cover.
Match the plug's contact arrangement to the recording input, not just its diameter.
A foam cover fits over the microphone head without making the recording wind-free.
The four-contact plug requires a matching microphone-input wiring arrangement.
The 2-section option is illustrated with one insulating ring on its 3.5 mm plug.
The 3-section option has two insulating rings; the recording input must accept that wiring.
Technical details
- Model: ZJ030MR
- Type: wired condenser lavalier microphone
- Pickup pattern specified: omnidirectional
- Current cable length options: 1.5 m
- Plug diameter: 3.5 mm
- Plug options: 2-, 3- or 4-section contact configuration
- Compatibility: microphone input with matching contact wiring and required input power
- Built-in battery: none
- Package: 1 microphone with lead, clothing clip and illustrated foam cover
- Excluded: recording device, sound card and adapters
Match the plug to your recording input and add a small clip-on microphone to your next spoken recording.
Scegli le opzioni