Mini RC Track Barriers & Traffic Props, Multiple Pack Sizes
Turn an open floor area into a recognisable mini driving course. These plastic RC barriers and traffic props let you mark corners, lanes and obstacles for small model cars. They are for hobbyists arranging practice layouts or miniature road scenes.
- ✅ Give a practice run a clear route — Place barriers around a corner before trying the same line again with your mini RC car.
- ✅ Change the challenge between runs — Reposition the loose pieces to create a tighter turn or a different obstacle layout.
- ✅ Make a road scene recognisable — Miniature barrier shapes and traffic props add visible detail to a display or driving area.
- ✅ Choose the layout size — Select a 50-, 100-, 200- or 300-piece barrier pack, or the separate traffic-props option.
Build a course you can rearrange
Lay out a route that suits your available space, then change it as the driving session develops. The small barriers can mark a drift line, a narrow passage or the edge of a miniature road without building a permanent track.
The quantity-labelled barrier options and Traffic BarrierProps are different selections. The props gallery includes cones, rails, fences and barrels, but it does not establish that every quantity pack contains all those shapes or colours. Check the chosen option image and contents rather than treating the whole gallery as one bundle.
The illustrated small road barrier measures approximately 6 × 1.8 × 2.5 cm. It is offered for layouts around 1:14–1:28 mini cars, but compare the actual dimensions with your model and desired lane width. Cars and complete track surfaces are not included; these are model props, not real traffic-safety equipment.
Choose the pack quantity for your layout; the pictured barrier measures approximately 6 × 1.8 × 2.5 cm.
Arrange the separate pieces into corners and lanes, then change the route for another run.
The red and white pieces illustrate the barrier style; check the selected pack's colour mix.
Compare a barrier's dimensions with the width of your mini car.
The traffic-props scene is a separate selection; the car is not included.
A mix of shapes can create a miniature road setting when included in the chosen props pack.
The cone view shows a prop type, not a guaranteed addition to every barrier pack.
Fence pieces add another scene detail only where included in the selected option.
Barrel colours shown are examples, not a promise of a complete multicolour set.
Check the traffic-props pack if you want the pictured guardrail shapes.
Guardrail colours vary in the illustrations; rely on the selected option rather than the full gallery.
The white-and-red rail is a miniature prop and not road-safety equipment.
Technical details
- Type: miniature RC track barriers and traffic props
- Material: plastic
- Suggested model scales: 1:14, 1:16, 1:18, 1:24 and 1:28; compare dimensions
- Illustrated small barrier size: approximately 6 × 1.8 × 2.5 cm
- Quantity options: 50, 100, 200 or 300 pieces
- Separate option: Traffic BarrierProps; contents differ from quantity packs
- Power: none required
- Included: selected barrier or props pack only
- Not included: RC car and track surface
Choose a pack for your available space and give the next mini driving session a route of its own.
Scegli le opzioni