Zigbee Wireless Scene Switch Button for eWeLink
Coming home with full hands is when a wall button earns its place. This battery Zigbee button sticks to the wall or sits on a table, and one press runs a scene you built in the eWeLink app. It suits a household already running an eWeLink Zigbee hub or Zigbee2MQTT.
One button, two scenes, no wiring needed
✅ Two scenes from one button Single and double press can each trigger a different scene, so one button covers two routines.
✅ Sticks on without wiring The supplied double-sided sticker fixes it to a wall, so no back box or electrician is needed.
✅ Sits on a table as well Set it beside the bed overnight and move it to the hallway during the day.
✅ Battery in the box A CR2032 comes with it, and general use is quoted at around two years per cell.
✅ Reaches the far end of the flat Zigbee commands travel up to 30 m in open area, though walls and floors shorten that.
A hub is part of the setup rather than an optional extra. The button pairs with an eWeLink Zigbee hub or Zigbee2MQTT, while Tuya hubs are not compatible, and it does not talk to Wi-Fi on its own.
Building a scene takes a few minutes: open the app, create the scene and pick the devices it controls, then assign it to a single or a double press on the button.
The 30 m figure is measured in open area. Through two walls or a concrete floor the signal drops, which is worth testing before you fix the sticker in a distant room.
It carries an IP55 rating, so a spot near a kitchen worktop or a bathroom basin is reasonable, and the plastic body wipes clean. How long the cell lasts depends on how often the button is pressed.
Technical details
- Communication: Zigbee 3.0
- Hub required: eWeLink Zigbee hub or Zigbee2MQTT (Tuya hubs not compatible)
- Power: CR2032 3 V DC battery (included)
- Battery life: Around 2 years in general use
- Control distance: Up to 30 m in open area
- Dimensions: 50 x 50 mm
- Mounting: Double-sided sticker, wall hung or tabletop
- Rating: IP55
- Operating conditions: -10 to 55 degrees C, 0-99% RH
- Package contents: 1 x smart button, 1 x CR2032 battery, 1 x double-sided sticker, 1 x user manual
Check your hub is eWeLink or Zigbee2MQTT, then pick the spot for your first scene.
Scegli le opzioni