ESP32-CAM OV2640 Camera Module Kit

Build a camera-connected prototype around the ESP32 platform. This ESP32-CAM/OV2640 range brings image capture and wireless development functions into a compact module for a suitable programmed project.

✅ Capture images in the electronics build - The OV2640 camera module provides the image input for the compatible ESP32 setup.

✅ Send the images through the supported wireless arrangement - Wi-Fi image transmission can form part of the firmware and network workflow you develop.

✅ Adapt the project around a programmable platform - The ESP32 development environment provides a starting point for the intended camera-connected function.

Choose the Optics and the Development Package

Use the module when the project needs its own image input and programmed response, such as an IoT observation or image-transfer prototype. It is a development component, so the final behaviour comes from the software, power and enclosure you prepare.

Select the lens/module configuration and check the KIT versus non-KIT package before ordering. Confirm the included programming/base board and the required camera lighting; the 650/850 and viewing-angle labels do not by themselves establish a complete night-viewing system.

Technical details

• ESP32-CAM range with OV2640 camera configuration
• Wi-Fi/Bluetooth development platform; 5V supply specification
• Lens configurations labelled 66, 120 or 160 degrees
• Multiple KIT and non-KIT choices; verify exact optics and programming hardware
• Memory-card support specified; card and finished enclosure separate

Choose the development package and bring an image input into the next ESP32 project.