TENS/EMS Snap Electrode Replacement Pads, 10–50 Pieces
Keep spare electrodes ready when your compatible stimulator's pads need replacing. These self-adhesive TENS/EMS replacement pads use a snap connector specified at 3.5 mm. They are for existing device owners who have checked the connector and pad requirements.
- ✅ Prepare your device for the next session — Replacement electrodes let you swap out worn pads without replacing the control unit.
- ✅ Connect compatible leads directly — The snap fitting attaches to a matching cable connector.
- ✅ Keep the pads in place during use — The self-adhesive contact surface needs no separate retaining strap.
- ✅ Choose a useful supply of spares — Three pack sizes let you order the quantity you need.
Match the connector, then choose your spare-pad quantity
These are replacement electrode pads for a compatible TENS/EMS device, not a complete powered unit. Each pad has a central snap fitting and a self-adhesive contact surface. Compare the connector and your device manufacturer's pad specification before buying; a snap appearance alone does not establish compatibility.
Choose 10 pieces for 5 pairs, 30 pieces for 15 pairs or 50 pieces for 25 pairs. The quantity is the number of individual pads, not complete machines or lead sets. The reusable format allows further use while the pad condition and adhesion remain suitable, but no fixed reuse count is promised.
Follow your stimulator's suitability, pad-placement and care instructions. Replace pads when their adhesive or contact surface is no longer in suitable condition and keep them stored clean between sessions. This purchase contains the selected pad quantity only; a stimulator, leads and power supply are not included.
Replacement pads connect to a separately owned compatible stimulator; the powered unit and leads are not included.
Check your device's approved pad placement and connector requirements before use.
Keep pads clean and follow the supplied care instructions between sessions.
The snap connector is specified at 3.5 mm; match it to your existing lead.
Choose the pack quantity for your own compatible device and routine.
Pack sizes are 10, 30 or 50 individual pads, not the assorted quantities shown in every illustration.
Technical details
- Product: replacement TENS/EMS electrode pads
- Connection: snap-on connector specified at 3.5 mm
- Compatibility: matching connector and device pad specification required
- Contact: self-adhesive
- Format: reusable while condition and adhesion remain suitable
- Pack options: 10 pieces/5 pairs, 30 pieces/15 pairs, 50 pieces/25 pairs
- Package: selected pad quantity only
- Excluded: stimulator unit, leads and power supply
Check your existing lead and device requirements, then choose the spare-pad pack for your next sessions.
Opties kiezen