12-Piece L-Shaped Corner Brackets, 15 x 25 x 25 mm

A drawer front drops, a shelf corner sags, and the fix is a small metal angle. This pack holds twelve L-shaped brackets, each 15 x 25 x 25 mm, with holes for screws and a silver finish. For drawer repairs, shelf builds and reinforcing flat-pack joints.

Twelve small angles for sagging corners

✅ Twelve per pack Enough for a run of drawers, or a shelf that needs a bracket at each corner.

✅ Braces a right angle Each bracket screws to two faces and holds the joint square.

✅ Tucks out of sight At 15 x 25 x 25 mm it fits inside a drawer or under a shelf.

✅ Evening drawer fix A dropped drawer front is braced from inside, without taking the unit apart.

✅ Hanging hole The drilled hole takes a hook or a light hanging item once fixed.

Fit the bracket inside the joint, one leg on each face, and use every hole. The legs are 15 mm and 25 mm, so a narrow face can take the short leg while the longer one carries the screws on the shelf or drawer side.

The material is iron with a silver finish. Iron will rust where it stays damp, so these belong indoors or in a dry garage rather than on an exposed outdoor joint.

Twelve brackets arrive without screws, so match the fixing to what you are drilling into: chipboard and MDF take a coarse screw, a timber batten takes a wood screw. Pre-drill near an edge to avoid splitting the board.

Technical details

• Type: L-shaped right-angle corner bracket
• Material: iron
• Finish: silver
• Size: 15 x 25 x 25 mm
• Pack contents: 12 brackets
• Screws: not included
• Fixing holes: pre-drilled, with a hanging hole
• Use: drawers, shelves, cabinets, flat-pack joints
• Origin: Mainland China

Count the corners to brace, then fix a bracket inside each joint with the right screws.

See more: explore more hardware and brackets