2.4G App and Remote LED Driver, 48W to 160W, Two-Colour Strips
Run a two-colour LED strip or chandelier from one unit, controlled through the 2.4G app or the handset. Six versions cover 48W to 160W, each with a DC output range to match the strip you are fitting. A fit for kitchen, cabinet and display builds.
One driver for a two-colour strip
✅ App or handset control Change the strip from the phone app, or use the remote when the phone is elsewhere.
✅ Six power steps Pick 48W, 80W, 100W, 120W, 140W or 160W to suit the length of strip you are fitting.
✅ Output to match the run Output ranges from 36-85V to 180-240V let you pick the version that suits the strip.
✅ Chandelier and strip builds One driver covers a two-colour strip, so a chandelier or display runs both tones from a single feed.
The six versions differ in output power and in output voltage band, and the strip decides which one is right. Add up the load of the run you are lighting, then choose the version whose rating sits above that figure; buying the largest is not the same as buying the correct one.
Input is AC 170-245V and the output is DC, so the driver converts mains for the strip instead of passing it through. No mains plug is supplied, which means the input side is wired into the installation rather than plugged into a socket.
The plastic body measures 87 x 39 x 17 mm, small enough to sit in a ceiling void or beside a chandelier rose. Control comes over 2.4G from the app or handset, so the driver does not need to live next to a wall switch.
Technical details
- Input: AC 170-245V
- Output: DC 36-85V / 60-130V / 90-165V / 120-200V / 150-200V / 180-240V
- Power options: 48W, 80W, 100W, 120W, 140W, 160W
- Current: 220-280mA
- Control: 2.4G app and remote handset
- Body: plastic, 87 x 39 x 17 mm
- Certification: CCC, FCC, RoHS
- Plug: none supplied
- Warranty: 3 years
Match the driver to your strip's load, then pick the power version that covers the run.
Velg alternativer