Ceramic Heat Emitter Bulb, 25-100 W, No Light Output
A basking spot should stay warm after the lamp timer clicks off. This ceramic emitter screws into a standard porcelain socket, radiates infrared heat and gives off no light, so it can run through the night without lighting the enclosure. It suits reptile keepers and anyone running a brooder for chicks or small pets.
Heat for Night-Time Basking and Brooders
✅ Night Heat Without a Glow Infrared heat comes off the ceramic face with no visible glow, so night-time warmth does not disturb an animal's dark period.
✅ Swaps Into Your Existing Fixture It screws into a standard porcelain incandescent socket, so a current reptile fixture can take it without an adapter.
✅ A Flat Face Instead of a Cone A flat face lets heat leave the body rather than build up inside it, unlike conical designs.
✅ Terrarium or Brooder The same emitter suits a reptile enclosure or a brooder for chicks and small pets, so one spare covers both.
✅ Pick the Wattage for the Space Offered in 25, 50, 75 and 100 W, so one fitting covers a small vivarium or a larger enclosure.
The useful difference appears at lights-out. A basking bulb that also glows has to be switched off at night, which leaves the enclosure cooling until morning; an emitter with no light output can stay on through the dark hours while the rest of the setup follows its usual day and night cycle.
Wattage is the choice that matters. The heating face measures 6 cm across, so the four ratings are what you match to the enclosure: a small vivarium sits well at the lower end, while a tall or open setup usually needs more. Check that the fixture holding the emitter is rated for the wattage you pick.
The body is ceramic with an alloy base, made for the heat it produces, and the average life is given as 20,000 hours. The flat face is the design point to note: where a conical body traps heat inside itself, this one lets it leave the surface and reach the animal.
One bulb is what arrives. The fixture, socket and thermostat are separate, and the emitter is a heat source only, so it adds warmth to a setup rather than light for viewing.
Technical details
- Type: Ceramic infrared heat emitter bulb
- Heat source: Ceramic, infrared, no light emitted
- Power options: 25 W, 50 W, 75 W, 100 W
- Heating surface diameter: 6 cm
- Average life: 20,000 hours
- Fitting: Standard porcelain incandescent socket
- Body material: Ceramic and alloy
- Package contents: 1 x heat emitter bulb
- Not included: Fixture, socket, thermostat and enclosure
Pick the wattage for your enclosure and keep the basking spot warm after lights out.
Velg alternativer