Wi-Fi Temperature & Humidity Sensor for Tuya Smart Life
Check the room's temperature and humidity from your phone before changing the heating or ventilation. This compact Wi-Fi sensor connects to Tuya or Smart Life on a 2.4 GHz network. It is for households adding room readings to an existing smart-home routine.
- ✅ Check another room from your phone — Open the app when you want a reading without walking over to a separate display.
- ✅ Act on changing conditions — Use configured temperature or humidity thresholds in routines with separately supplied compatible devices.
- ✅ Let the household see the same readings — Device sharing gives authorised family members access through their own phones.
- ✅ Know when power needs attention — A low-battery reminder prompts you to check the sensor's batteries.
Room readings that fit your daily routine
Place the compact sensor where it can sample the room and maintain a Wi-Fi connection, then add it in Smart Life or Tuya. Bluetooth is used during the described pairing process; the normal network connection is 2.4 GHz Wi-Fi.
Use the readings to decide when to ventilate or to configure an action with compatible equipment. A humidifier, air conditioner or controller shown in the gallery is separate hardware, and the sensor does not heat, cool or change humidity by itself.
The app brings readings, history and sharing together. Notifications and linked actions depend on your configuration and connectivity; they are not a guarantee that every change will be reported. LR03 battery power is specified at DC 3 V, but battery inclusion is not confirmed.
The compact sensor adds phone-viewable readings without a large wall display.
Check temperature and humidity in the app before deciding whether to adjust the room.
Linked appliance actions require compatible equipment and an automation you configure.
Share access with authorised household members instead of passing one phone around.
Set app thresholds for notifications; delivery depends on the connection and settings.
Compare the small housing with your intended position and provide the required LR03 battery power.
The slim housing keeps the measurement point unobtrusive on a suitable indoor surface.
Pair through Smart Life using a 2.4 GHz Wi-Fi network; Bluetooth assists the setup process.
Third-party account linking follows initial Tuya or Smart Life setup; smart speakers are separate devices.
Technical details
- Measurements: temperature and relative humidity
- Network: 2.4 GHz Wi-Fi
- Apps: Smart Life and Tuya
- Pairing: Bluetooth-assisted process described
- Temperature measuring range: −10 to 60°C
- Humidity measuring range: 0–100% RH
- Operating conditions: −10 to 50°C, up to 95% RH
- Power: DC 3 V, LR03 batteries; inclusion not confirmed
- Dimensions: approximately 70 × 25 × 20 mm
- Included: 1 sensor; linked appliances not included
Add a reading point to the room you want to understand better, then build the routine around your own needs.
Velg alternativer