USB Audio Codec Module - Speaker Option

Add recording and playback to a compatible USB host project. This compact USB audio codec module combines an onboard microphone with a speaker connection for a Raspberry Pi, Jetson Nano or other supported host.

✅ Bring microphone input into the project - The onboard microphone provides an audio-input starting point without a separate microphone board.

✅ Add a speaker output path - The speaker connection supports playback through a correctly matched speaker arrangement.

✅ Connect through a standard host interface - The USB-A interface makes the module a practical audio option for a compatible USB host.

Give the Project a Listening and Speaking Path

For a small host-based project, input and output on the same module let you build both sides of the audio arrangement. Test recording and playback separately before placing the board in the final enclosure, so each path is ready for the intended software.

Choose USB TO AUDIO for the module selection or with speaker for the speaker package. Check the host's USB-audio support and the speaker requirements for the supplied board; Raspberry Pi, Jetson Nano and other host computers are separate equipment.

Technical details

• USB 2.0 Type-A stereo audio codec module
• Onboard microphone and speaker connection
• Multiple sample rates; default 48kHz specified
• USB TO AUDIO or with speaker selection
• Check operating-system and speaker compatibility

Choose the package and bring audio input and output into the next host project.