Acrylic Turntable Slipmat for 12-Inch Records, 3 mm

Felt mats flatten out and hold dust, and a record that does not sit flat lets the stylus wander. This 3 mm acrylic slipmat drops onto a 12-inch platter and gives the record a firm, level surface. It suits anyone with a standard deck and a stack of LPs.

A Flat, Level Surface Under the Record

✅ Fits the platter you have At 300 mm across it covers a standard 12-inch platter, with nothing to trim or align.

✅ Swapped in a minute Lift the old mat, drop this one over the spindle and play; no setup, no adjustment, no tools.

✅ Stiffer than cloth Three millimetres of rigid acrylic sit between platter and record instead of a soft layer that can give under the groove.

✅ LPs and singles alike A full album and a 12-inch single rest on the same flat disc, so the surface does not change between them.

✅ Visible on the deck The glossy finish catches the light at the platter edge, which changes how the turntable looks on the shelf.

A slipmat sits between the metal platter and the record, and its job is to give the vinyl a consistent surface. Acrylic is rigid, so the record rests on a flat disc that does not compress unevenly the way a worn felt mat can.

It is cut for 12-inch turntables. If your deck is a compact or portable model, measure the platter across before ordering, because the mat is 300 mm wide and expects a platter of that size.

One mat arrives, and the record and the turntable are obviously not part of it. Gloss shows dust, so a dry cloth over the surface before each side keeps the finish clear and stops grit travelling to the record.

Technical details

• Material: Acrylic
• Diameter: 300 mm
• Thickness: 3 mm
• Fits: 12-inch turntables
• Records: 12-inch LPs and 45 rpm singles
• Finish: Glossy
• In the box: 1 turntable mat

Fit this mat if your deck takes 12-inch records and the platter needs a flatter surface.

See more: explore more audio devices