2.4 GHz Wireless DMX Transmitter and Receiver Board Pack

Build a wireless DMX link into compatible lighting equipment with a pack of ten transmitter/receiver modules.

✅ Move the DMX link off the long cable run - A paired wireless arrangement carries supported control data between the integration points.

✅ Configure modules for the link - The two-in-one transmit/receive design supports the described linking arrangement.

✅ See the current operating state - A colour status LED provides the module's local signal indication.

✅ Equip several fixtures or projects - Ten boards provide modules for a multi-point lighting build.

Integrate the board with power and DMX

A bare wireless module can add a control link to a fixture or interface when the electrical design supports it. Configure matching group settings and test the complete lighting response before use.

These are PCB modules requiring correct 5 V power, DMX wiring and an appropriate enclosure. Wireless coverage depends on the environment, and the board is not an ordinary Wi-Fi network controller or a complete stage-light fixture.

Technical details

• Model reference: CL-10BPCB
• Protocol reference: DMX512
• Wireless band: 2.4 GHz
• Supply: DC 5 V
• Board size reference: 70 × 18 × 10 mm
• Package: ten wireless DMX boards
• Power supplies and installation hardware: separate

Add a planned wireless DMX path to your lighting build.