Broadband RF Noise Source Module

Add a broadband RF noise source to a compatible bench setup for comparative filter and circuit measurements.

✅ Excite a range of frequencies - The noise-source output supplies a broadband input for suitable RF experiments.

✅ Investigate a filter response - A compatible spectrum analyser can compare the signal through the device under test.

✅ Extend the test arrangement - A suitable bridge can add a reflection-measurement path to the broader setup.

Build the measurement around the noise source

A broadband source can help reveal how an RF circuit passes or rejects different frequencies when used with appropriate measurement equipment. This module provides the source stage rather than the complete analysis system.

Check actual output level, usable bandwidth and instrument input limits before connection. Use suitable references and calibration for the method; a noise source is not a calibrated tracking generator, and the module should be used in a controlled connected test setup.

Technical details

• Type: RF noise-source module
• Supply reference: DC 9-12 V
• Output impedance: 50 ohms
• Frequency title reference: 2 MHz-2 GHz; verify usable response
• Size: approximately 62.6 × 50 × 20.1 mm
• Interfaces: DC power and SMA

Add a broadband source stage to your appropriately configured RF bench.