





Speaker Drivers 2-Inch 4 Ohm 12W Pair for DIY Audio
✅ Build with a matched pair. Two drivers arrive together, so a stereo pair or a spare unit is already covered.
✅ Check the cabinet fit. The 52 mm square frame and mounting holes let you compare the drivers with your enclosure.
✅ Wire to your amplifier. Exposed terminals give a connection point for your own speaker wiring.
Speaker drivers for a compact audio build
A pair of bare 2-inch full-range drivers with 4-ohm impedance and a 12 W marking, intended for a wired speaker assembly or a replacement job. The square frame is approximately 52 mm across with a depth of about 45 mm, so measure the cut-out and clearance in your cabinet before ordering. Amplifier, enclosure and wiring are not included, and there is no Bluetooth receiver or battery.
Technical details
- Nominal size: 2 inches
- Impedance: 4 ohms
- Power marking: 12 W per driver
- Approximate frame: 52 × 52 mm
- Approximate depth: 45 mm
- Package: 2 speaker drivers







Match the impedance and mounting space, then add the pair to your build.
Choose options





