






Three-Channel Relay Board for Raspberry Pi 4B, 3B+ and 3B
✅ Switch three circuits. Each relay has its own channel, so separate project loads run from one board.
✅ See each state. Indicator LEDs show which relay is active while you test the build.
✅ Route the pins. Jumpers set the control-pin arrangement so the board fits around your other GPIO connections.
✅ Wire it neatly. Screw terminals take the external wiring for the circuits being switched.
Three relay outputs for a Pi project
An expansion board that adds three relay channels to a compatible Raspberry Pi through the 40-pin GPIO header. Jumper selection sets the control pins, and screw terminals take the wiring for the circuits being switched.
Technical details
- Product: relay expansion board
- Relay channels: three
- Interface: 40-pin GPIO
- Optocouplers: PC817
- Control-pin selection: jumper configurable
- Relay contact markings: 5 A at 250 V AC or 5 A at 30 V DC
- Approximate board dimensions: 65.15 × 56.21 mm
- Package: one relay board and one screw set
- Raspberry Pi: not included












Add the board to a compatible Pi and switch three outputs.
Choose options








