N04 NVMe Adapter Board for Raspberry Pi 5

Add a compatible NVMe SSD above a Raspberry Pi 5 without soldering an adapter into the project. The N04 top expansion board links the Pi's PCIe interface to an M.2 drive, with mounting hardware for several SSD lengths.

✅ Use NVMe storage with the Pi - The adapter provides the PCIe-to-M.2 connection for a compatible SSD.

✅ Fit different drive lengths - 2230, 2242, 2260 and 2280 mounting support gives several SSD choices.

✅ Keep display and camera cables routed - Board cut-outs provide paths for the Pi's display/camera ribbon cables.

✅ See drive activity - An ACT LED provides a local activity indication on the expansion board.

Build the Storage into the Pi Assembly

A storage-focused Pi project needs a physical place for the SSD as well as a data connection. This top board brings those parts together, letting you arrange the drive as part of the Pi assembly rather than a separate loose adapter.

Use a supported M-key NVMe drive and plan the host configuration and cooling for the complete system. The included ribbon cable and fixings serve the adapter installation; the Raspberry Pi 5 and SSD are purchased separately.

Technical details

• Model: N04
• Host: Raspberry Pi 5
• Drive: M-key NVMe, sizes 2230/2242/2260/2280
• PCIe: x1 interface
• Includes: board, 40 mm PCIe ribbon, spacers and mounting screws
• Pi and SSD: not included

Add the N04 to a compatible Pi 5 build and give the NVMe drive a defined mounting place.