DRV8825 Stepper Motor Driver Modules - Five-Pack

Control matching bipolar stepper motors in an electronics project with DRV8825 driver modules. The five-pack provides carrier boards for supported step-and-direction control systems.

✅ Control movement from a host controller - Step-and-direction inputs provide a clear interface between the project controller and the motor driver.

✅ Select finer step increments - Microstepping options down to 1/32 step let you configure the resolution supported by the mechanical setup.

✅ Set the motor current limit - An adjustable current setting lets the driver be matched to the actual motor and cooling arrangement.

Match the Driver to the Motor and Board

Use the modules with a compatible carrier pinout, control logic and motor supply. Their similarities to A4988-style boards do not make every installation a direct swap.

The supply range is 8.2 to 45 V, with output-current capability dependent on cooling and configuration. Set the current limit and install suitable heatsinking before operating the completed project.

Technical details

• Five DRV8825 driver modules
• Bipolar stepper-motor control
• Step/direction interface
• Six step resolutions, full-step to 1/32
• Supply: 8.2 to 45 V
• Adjustable current limit
• Motor and host controller not included

Build matched stepper control around the correct driver settings.