Plastic Pipe Socket Fusion Welder, 600/800/1000 W Kit Options
Prepare compatible plastic pipe and fittings for socket-fusion joints during installation. This pipe fusion tool heats matching pipe ends and fittings using interchangeable dies, with separate 600, 800 and 1000 W packages. It is for users following the pipe manufacturer's fusion procedure and checking the required die sizes.
- ✅ Heat the pipe and fitting as a matching pair — The male and female die faces prepare both joint surfaces.
- ✅ Choose dies for the pipework in hand — Separate kits cover smaller or larger offered pipe sizes.
- ✅ Set down the tool between joints — The supplied stand provides a place for the heating unit.
- ✅ Check settings on display-equipped versions — The 800 W and 1000 W options include a digital display.
- ✅ Change the fitted die for the next size — Included screws and a spanner allow die installation when the tool is cool.
Match the fusion kit to the pipe and fitting system
Home Use 600W and 800W 32 LED Display each include 20, 25 and 32 mm dies. The 1000W 64 LED Display package adds 40, 50 and 63 mm dies for six sizes in total. The option name '64' is not an additional confirmed 64 mm die.
PPR, PP, PB and PE are stated applications, but the pipe and fitting must specifically permit socket fusion with the chosen tooling. Follow their prescribed preparation, temperature, heating time, insertion depth and cooling procedure. A heated tool alone does not guarantee a pressure-tight or approved joint.
Each kit states one fusion unit, matching dies, four screws, a spanner and carton, with a stand illustrated. Pipes, fittings, cutters and protective equipment are excluded. Mains operation and an EU plug are stated; check the actual rating plate against the supply before connecting and use the required protective earth. Keep hands and cables away from hot faces and allow full cooling before changing dies.
Only the largest offered kit includes all six stated die sizes.
The illustration identifies the heating plate, handle, stand and display.
Pipe and fitting preparation follows the pipe manufacturer's fusion procedure.
Digital controls are on the display-equipped package options.
Material names alone do not confirm compatibility with every pipe system.
Keep the power lead away from hot faces; no burn-proof cable claim is made.
The 600 W package includes 20, 25 and 32 mm dies.
The 800 W display package includes three stated die sizes.
The 1000 W display package includes 20, 25, 32, 40, 50 and 63 mm dies.
Technical details
- Tool: plastic pipe socket-fusion heating unit
- Power options stated: 600 W, 800 W or 1000 W
- Applications stated: compatible PPR, PP, PB and PE socket-fusion systems
- 600/800 W die sizes: 20, 25 and 32 mm
- 1000 W die sizes: 20, 25, 32, 40, 50 and 63 mm
- Display: digital on 800W 32 LED Display and 1000W 64 LED Display options
- Power connection: mains, EU plug; verify actual voltage rating before use
- Package: 1 selected unit, dies, 4 screws, spanner and carton; stand illustrated
- Excluded: pipe, fittings, cutter and protective equipment
Choose the die package that matches your pipe system and prepare an orderly socket-fusion setup.
Choose options