EP4CE6E22 FPGA Development Board

Build and test FPGA logic with an EP4CE6E22 Cyclone IV development board that includes local inputs, indicators and a JTAG connection.

✅ Program through a dedicated interface - The JTAG port provides the connection for a compatible Blaster programmer.

✅ Try logic with onboard controls - Five buttons and five LEDs offer simple inputs and outputs for development exercises.

✅ Connect serial experiments - An onboard CH340 interface provides the described serial communication resource.

✅ Plan for the peripheral's logic voltage - Selectable pin-voltage arrangements support a correctly matched external interface.

Move the logic design onto a physical board

An FPGA board lets you test how a digital design behaves with real input and output connections. The onboard buttons and indicators give small exercises a useful starting point before adding external modules.

Use compatible programming tools and follow the board's configuration procedure for startup after power loss. Check the actual pin-voltage selection before connecting peripherals; the development board does not include every programmer or external module shown in project examples.

Technical details

• FPGA: Cyclone IV EP4CE6E22 family
• Programming: JTAG
• Onboard: CH340 serial chip, memory, five LEDs and five buttons
• 50 MHz oscillator described
• Dimensions: approximately 10 × 5 × 2 cm
• Package: one development board

Bring your next digital-logic exercise onto an FPGA development board.