Normally Closed CNC Z-Axis Tool Setter
Provide a repeatable Z-axis contact reference in a compatible CNC setup with a normally closed tool setter.
✅ Reference tool height at a defined point - Contact sensing provides the input used by a matching tool-setting routine.
✅ Connect with a defined switch state - The normally closed arrangement suits controllers configured for that input behaviour.
✅ Route the cable to the controller - A 2.1 m cable and protective tube provide the described connection arrangement.
Build tool referencing into the CNC routine
Tool length changes need a reference before the next operation. A fixed contact setter gives a compatible controller a point to use in its configured Z-axis tool-setting sequence.
Confirm wiring, input state and available travel before installation, then test the routine carefully. This version is normally closed only and has no air-blast nozzle; keep the contact surface clear according to the setup instructions.
Technical details
- Type: CNC Z-axis contact tool setter
- Switch form: normally closed
- Stroke: 5 mm
- Contact force: 1.5 N
- Dimensions: approximately 62 × 55 × 55 mm
- Cable: 2.1 m; protective tube: 1 m
- Air-blast nozzle: not included
Add a defined contact reference to your compatible CNC tool-setting routine.
Choose options