ST/SC Serial Bus Servo Adapter A Board, USB or UART

✅ Connect servos to a host. The board links a compatible ST or SC serial bus servo to a computer or microcontroller.

✅ Choose USB or UART. A jumper setting selects the control route that matches your setup.

✅ Keep power beside control. The DC socket or screw terminal gives the servo supply its own connection point.

✅ Fit a small build. The 42 by 33 mm board has mounting holes for a compact robotics layout.

One interface for an ST or SC servo bus

The Bus-Servo-Adapter-A board connects compatible ST or SC serial bus servos to a suitable computer or microcontroller. It offers USB or UART control, selected by a jumper, and takes servo power through a DC socket or screw terminal. The board is marked DC 9–12.6 V, so match the supply to the connected servos.

Technical details

• Bus-Servo-Adapter-A; compatible ST/SC serial bus servos
• USB and UART interfaces
• 5.5 × 2.1 mm DC socket and screw terminal
• Board dimensions: 42 × 33 mm
• 2.5 mm mounting holes on 37 × 28 mm centres

Check the servo series and supply, then add the adapter to the build.