Panel-Mount Force Indicator with Dual LED Windows

Bring a compatible load-cell signal to a control panel with a digital force indicator and two relay outputs.

✅ See the measured and reference values together - Dual five-digit windows provide the PV and SV display arrangement.

✅ Link a configured value to the circuit - Two relay contacts provide the stated alarm or control outputs.

✅ Power a matching sensor input - The 5 V excitation output supports a sensor within its specified current limit.

✅ Keep the display at the machine - A panel-mount format puts the reading beside the process.

Scale the sensor before using the outputs

A load-cell signal needs the correct excitation, input scaling and calibration before it becomes a meaningful force reading. This indicator provides that display-and-control stage for a suitably designed fixture.

Verify sensor sensitivity, wiring and relay ratings before installation. The selected mains-powered unit needs an appropriate enclosure and qualified wiring; its relays do not turn the instrument into a safety-rated press control.

Technical details

• Type: digital force indicator/controller
• Display: dual five-digit red LEDs
• Supply reference: AC 90-260 V; selected 220 V option
• Sensor excitation: 5 V, below 50 mA
• Outputs: two relay contacts
• Sensor and test fixture: separate

Give your load-cell fixture a local display and configured outputs.