Magnetic Digital Spirit Level and Inclinometer

Compare surface angles with a digital level ruler offering absolute and relative measurements.

✅ Read the angle directly - A backlit display shows the measured value beside the surface.

✅ Compare one surface with another - Relative mode lets you zero at a reference before checking the second surface.

✅ Attach to a suitable steel surface - A magnetic base supports the tool while the contact is correctly seated.

✅ Keep a value for your notes - HOLD retains the displayed angle after the measurement.

Establish the reference before fitting the part

A digital level can help check a slope or compare two surfaces during layout. Clean the contact area and place the ruler fully against the surface before zeroing or reading.

Confirm calibration and the required tolerance for the job. The display step is not total setup accuracy, and a magnetic base should not be relied on where a falling tool could cause damage.

Technical details

• Model reference: HW-200
• Range: 4 × 90 degrees
• Resolution: 0.05 degree
• Accuracy reference: ±0.1 degree
• Size: approximately 286 × 59 × 20 mm
• Power: two AAA batteries, not included
• Colour: selected blue, yellow or red

Add a direct angle reference to your layout tools.