ESP32 Starter Kit with OLED, Sensors and Breadboard

✅ Start from one box. Controller, display, sensors and breadboard parts arrive together for a first build.

✅ Try several inputs. Temperature, light, motion and obstacle modules each give a signal to read.

✅ See your output. The OLED, LEDs and buzzers show what your firmware is doing while you test.

✅ Rewire as you learn. The breadboard and Dupont wires let you change circuits without soldering anything.

Build a circuit, check it, then rebuild

Start ESP32 learning with a kit that puts the controller, display, sensors and breadboard parts in one box. Begin with the board and one sensor, then add the potentiometer, relay or other outputs as the code develops. Resistors, switch parts and a Micro USB cable are included, and the project behaviour follows your own wiring and firmware.

Technical details

• ESP32 development board
• 0.96-inch OLED; 830-point breadboard
• DHT11, HC-SR501, light and obstacle modules
• 5 V two-channel relay
• 10k potentiometer, resistors and switch parts
• Buzzers, LEDs, Dupont wires and Micro USB cable

Open the box and start your first ESP32 input-and-display build.