Vibration Sensor Module with Analogue and Digital Outputs

✅ Add movement detection. The spring switch changes state when the module moves.

✅ Choose an output type. Separate analogue and digital pins give two interface options.

✅ Pick bare or cased. Select the bare sensor or the version with a case.

✅ Fix it to your build. The board includes M4 fixing provisions for a suitable project.

Movement detection for your build

A vibration sensor module that reports movement as an analogue or digital signal for a compatible microcontroller. It runs from a supported 3.3 V or 5 V supply, and the digital output goes low momentarily when vibration closes the switch. The board measures about 40 x 22.5 mm; the microcontroller and programming are separate.

Technical details

• Vibration-sensor module
• 3.3 V / 5 V supply
• Analogue and digital outputs
• G / V / A / D pins
• Approximately 40 x 22.5 mm
• Bare sensor or case version
• Microcontroller and programming separate

Check your supply and pins, then add vibration sensing to the build.