LCR-MF10 Electronic Component Tester

Bring several component checks to one compact bench instrument. The LCR-MF10 uses a colour TFT display for supported electronic-component measurements and adds an infrared inspection function.

✅ Check several component types with one tester - Supported resistor, capacitor, inductor, transistor and diode checks provide different bench references on the same unit.

✅ Inspect a supported remote-control signal - The infrared function can receive and display supported IR signals for another electronics-checking task.

✅ Carry the tester between work areas - The rechargeable compact body provides a portable instrument that can be prepared again through Type-C charging.

A Small Instrument for the Component Bench

Use the tester while sorting suitable parts, investigating a removed component or preparing a small electronics build. The colour display keeps the supported result on the instrument, making it practical beside the parts being checked.

Prepare isolated, discharged components and use the correct test area according to the instructions. The infrared function has model-specific decoding limits, so check protocol support for that task. Keep the supplied probes and calibration parts with the unit between sessions.

Technical details

• Model: LCR-MF10 electronic component tester
• 160 x 128 TFT display specification
• Supported semiconductor, resistance, capacitance and inductance checks
• IR reception/waveform function; decoding support is limited
• Type-C rechargeable battery; approx. 87 x 68 x 22mm
• Unit, cable, three test hooks, sample parts, SMT board, calibration probe and manual

Prepare the bench parts and bring the supported checks into one portable instrument.