Eight-Channel USB-C Logic Analyzer

Capture digital signal timing on a compatible computer with a compact USB logic analyser. The nanoDLA provides eight simultaneous channels and up to 24 MHz sampling for examining supported low-voltage digital circuits.

✅ Compare several digital lines together - Eight channels can capture timing relationships in the same acquisition.

✅ Inspect protocol traffic in software - PulseView decoders can interpret compatible captured buses such as UART.

✅ Choose the capture around the signal - Configurable channels and sampling rate let you set up the acquisition.

See How the Digital Lines Relate

A circuit can have the expected high and low levels yet still fail because events happen in the wrong order. A logic capture puts several lines on one timeline, letting you inspect transitions and compare them with the expected protocol.

Install the compatible software and driver, then check every input voltage before connection. This is a digital logic analyser, not an oscilloscope for analogue waveforms or mains measurements. Set the sample rate appropriately for the signal rather than assuming a 24 MHz clock is always fully captured.

Technical details

• Model: nanoDLA, USB-C version
• Channels: eight simultaneous
• Maximum sampling rate: 24 MHz
• Specified input range: -0.5 to 5.25 V
• Low-level threshold range: -0.5 to 0.8 V; high: 2-5.25 V
• Board size: approximately 39 × 20 mm
• Software: compatible PulseView installation

Add a multichannel timing view to your next compatible digital-circuit investigation.