220-240 V PIR Lighting Switch with Adjustable Delay

Switch a compatible light automatically when movement is detected with an adjustable mains-powered PIR sensor.

✅ Activate the light on approach - A passive-infrared detector provides the switching signal when it detects movement.

✅ Limit activation to darker conditions - An adjustable ambient-light threshold sets when motion should trigger the load.

✅ Choose how long the light stays on - An adjustable delay keeps the load active after detection.

✅ Aim the sensing area - A swivelling sensor body helps align the detector with the approach path.

Set the detection to suit the entrance

Place the sensor where normal movement crosses its detection area, then adjust its angle, light threshold and delay. Testing at the installed location helps avoid unnecessary activation.

The sensor switches a separate compatible load and requires fixed mains wiring. Match the light's load characteristics and the installation environment to the actual unit's ratings, with installation performed by a qualified person.

Technical details

• Supply: AC 220-240 V, 50/60 Hz
• Detection-angle reference: 180 degrees
• Delay reference: approximately 5 seconds to 8 minutes
• Load reference: up to 800 W incandescent / 200 W LED
• Selections: black or white

Set up automatic lighting for a compatible installation.