Momentary SPST Starter Button with Neoprene Cover, 12V

Add a push-and-release control to a matching vehicle circuit. This normally open starter-style button suits installers who need momentary operation and have checked its actual electrical and mounting requirements.

• ✅ Control only while pressed — The momentary contact returns to off when released.
• ✅ Use a defined mounting size — The stated 16 mm hole reference helps compare panels.
• ✅ Cover the button surface — A black neoprene cover provides an outer layer.
• ✅ Keep wiring simple — The SPST two-terminal format serves a matching control circuit.

A Push-to-On, Release-to-Off Control

The switch is normally open: pressing closes the contact and releasing opens it again. Match that action to the existing circuit before installation.

The stated rating is 50 A at 12 V; do not infer the same capacity at 24 V or for every duty. The cover is not a verified IP certification, and direct starter-current suitability requires circuit-specific assessment.

Technical details

• Action: OFF-(ON), momentary
• Contact: SPST, normally open
• Terminals: 2
• Rating reference: 50 A at 12 V
• Mounting hole: approximately 16 mm/5⁄8 inch
• Height without cover: approximately 2.44–2.46 inches
• Button diameter reference: 1.1 inches
• Cover: black neoprene

Match the momentary action and actual rating to your intended control circuit.

Explore more car accessories & gadgets