RP2040 USB Debug Probe for Pico Projects

Connect a compatible Pico or ARM development target to your computer for debugging with an RP2040-based USB debug probe.

✅ Inspect a running development target - An SWD connection provides the path for compatible hardware-debugging tools.

✅ Add a serial connection - A USB-to-UART bridge supports a separate compatible serial communication workflow.

✅ Use familiar debugging software - CMSIS-DAP support provides the described route to tools such as OpenOCD.

✅ Keep the board housed - A transparent case covers the probe while leaving its connections accessible.

Give the debugger a hardware connection

Software debugging can be more useful when the computer can communicate with the target's debug interface. This probe supplies that bridge for a correctly connected and supported development board.

Check target voltage, connector pinout and tool configuration before use. The probe is a development accessory rather than a Pico application board, and support depends on the target and the debugging software.

Technical details

• Controller: RP2040
• Host connection: Micro-USB
• Target connections: three-pin SWD and UART
• Protocol: CMSIS-DAP
• Housing: transparent plastic
• Package: probe with described connection cables

Add a hardware-debug path to your compatible embedded project.